3Pc Car Refill Cooling Pumps Kit Universal Auto Radiator Set Vacuum Coolant System Antifreeze Injector Vacuum Pressure Tool

Attention!!!                

1. We have a manual for this product. If you don’t know how to use it, please contact us.       

2. The color of the box is red or blue. If you mind, please contact us first. 

3. We don’t ship to the following area from our European warehouse

    *Spain: Canary Island,Balearic Islands

*France: French Polynesia, Reunion Island

*Portugal: Madeira & Azores

4. The container may have dents or cracks during transportation,but does not affect the use of  tools, please understand

Description:

The 3-piece antifreeze replacement tool for automobiles is a set of precision machining, accurate measurement, and easy to operate. It is suitable for a wide range of automobiles.

Specifications:

Air pressure: – 90psi
Air consumption: – 12cfm fluid
Hose length: 900mm
Air inlet size: 1 / 4
Product packaging: Plastic box

Instructions for use

1. Open the water tank. Before opening the tank cover, make sure the tank is cool.

2. Select the water tank probe of the appropriate car series.

3. Tighten it to the water tank and check the rubber ring for complete compliance.

4. Insert the quick connector into the tank probe.

5. Take out the hand pressure pump set, pressurize until the pressure indicates that the indication reaches about 15~20psi (or

1Bar).

6. Check the pressure gauge.

6.1 Assuming that the pointer of the pressure gauge remains unchanged for several minutes, it means that the system can be used normally

of.

6.2 If the pointer goes down, it indicates a crack in the system due to pressure damage

6.2.1 Check whether there is water leakage in each pipeline of the water tank, and repair it according to the location of the leakage.

6.2.2 Check the condition of the rubber ring.

6.2.3 Re-test to ensure that the repaired system can be used normally.

7. After the test is completed, release the pressure from the pressure relief valve to the pressure gauge returns to zero.

8. Before using the collection:

8.1 Insert the water tank probe into the quick head, pressurize it several times, and remove the residues in the hand pump group tube

When the water vapor is discharged, it can be stored.

8.2 Pneumatic oil is injected into the air inlet hole at the rear of the hand pump group to lubricate the piston in the pipe. again

Insert the water tank probe into the quick, pressurize several times, and drain the residual gas and oil in the hand pump group pipe.

out to collect.

Box size: 340*240*85MM

Gross weight: 1.5KG

Package List:

1 X Vacuum purge refill tool
1 X Universal radiator adapter
1 X Coolant hose
1 X English manual